|
EuroTech CNC Machines
 As a measure to focus on Kitchen and Bath products which are less competitive than diamond tools, we have decided to close our diamond tools department and thus need to clear out all stocks on diamond tools.
Yes, all diamond tools in stock have to go, including diamond blades, polishing pads, grinding cup wheels, coring drill bits, tile blades, masonry blades, concrete blades, CNC tooling, engineered stone tools and other high-end diamond tools. Sale prices? Just our costs! No credit is given for the sale of any of these clearance items. So bring your check book, credit card, debit card or cash when you come. Again, no 15-day or 30-day credit. You just take what you pay.
Want to see the actual clearance prices? Click here to send us a request and we will send you the pricelist.
We have teamed up with MCD Technology in Delta BC to bring you Canadian made quality stone fabrication machines with 24-hour round the clock assistance and support. All machines come with a one year warranty.
The following CNC machine has been engineered specifically for the processing of engineered stone, marble and granite products. In designing and building this CNC machine, MCD Technology has been very careful to select quality components readily available anywhere in North America. This is to minimize costly downtime waiting for replacement parts should repairs be required.
| DELTA 1003-1 3-Axis CNC CENTER - Click here for pictures and more detailed descriptions |
- Heavy-duty steel frame construction, stress relieved then precision machined, to guarantee the rigidity required for a precise cut.
- Heavy duty Mobile Bridge designed to travel over the work area of the table.
- Bridge movement (Y-Axis) by means of precise linear track bearings and helical rack and pinion powered by digital brush less servo motors (2) with auto lube.
- 6’ x 10’ thick alum table top
- Vacuum manifolds with 32 pair of swivel ports mounted on the front of the table, easily accessible to the operator.
- Spindle-holding trolley movement (X-Axis) by means of precise linear bearings and helical rack and pinion powered by a digital brush less servo-motor with auto lube.
- Powerful and reliable high-frequency spindle.
- Spindle vertical travel (Z-Axis) by means of precise linear track bearings and ball screw. Maximum travel 14” which allows for rough-shaping of thick billets.
- Rapid displacements up to 1500 inches per minute, which allows faster work cycles.
- Digital” brush less servo motors controlled by state-of-the-art numerically controlled drive unit.
- 19-position tool-storage for automated tool changing.
- The machine complies with UL an CSA Standards.
- Fagor 8040 control system.
- 3 Axis entry level control software
- 3 HP Liquid ring Seal Vacuum pump
- Air assist for easy alignment of heavy pieces of stone.
- Green laser mounted on bridge for material alignment.
- Remote hand wheel to assist in work alignment.
- “X” Axis travel 120”
- “Y” Axis travel 72”
- “Z” Axis travel 14”
- “X”, and “Y” rapid displacement up to 1500 inches per minute, “Z” 50” per minute
- Tool max Diameter 6”
- Tool max length 6”
- Tool max weight 30 lbs.
- Spindle nose ISO 40.
- Spindle motor power 17 hp.
- Spindle max rotation speed 10,000 rpm.
- Power supply required 3 phase 460/480Volt AC, 60hz. (100amps)
- Overall dimension of the machine length – 19’ - 6”, width 14’, height from top of spindle on carriage 96 inches
- Water requirement 20 liters/minute.
- Machine weight approx 6 tons.
- Tool holder max capacity 19 tools
- Sound pressure level less than 80 decibels.
- Compressed air required 120 psi
- Overall dimension of the machine length 19' - 6", width 14', height from top of spindle on carriage 96"
|
| DELTA 1003-2 3-Axis CNC CENTER |
Same as Delta 1003-1 except for the fact this one has two tables - the second table and the spindle can be modified for waterjet operation if needed. |
| DELTA 1004-1 4-Axis CNC CENTER |
- Heavy-duty steel frame construction, stress relieved then precision machined, to guarantee the rigidity required for a precise cut.
- Heavy duty Mobile Bridge designed to travel over the work area of the table.
- Bridge movement (Y-Axis) by means of precise linear track bearings and helical rack and pinion powered by digital brush less servo motors (2) with auto lube.
- 6’ x 10’ thick alum table top
- One set vacuum manifolds with 32 pair of swivel ports mounted on the front of the table, easily accessible to the operator.
- Spindle-holding trolley movement (X-Axis) by means of precise linear bearings and helical rack and pinion powered by a digital brush less servo-motor with auto lube.
- Powerful and reliable high-frequency spindle.
- Spindle vertical travel (Z-Axis) by means of precise linear track bearings and ball screw. Maximum travel 14” which allows for rough-shaping of thick billets.
- Rapid displacements up to 1500 inches per minute, which allows faster work cycles.
- Digital” brush less servo motors controlled by state-of-the-art numerically controlled drive unit.
- 30-position tool-storage for automated tool changing.
- The machine complies with UL an CSA Standards.
- Fagor 8055 control system.
- 4 Axis entry level control software
- 3 HP Liquid ring Seal Vacuum pump
- Air assist for easy alignment of heavy pieces of stone.
- Green laser mounted on bridge for material alignment.
- Remote hand wheel to assist in work alignment.
- “X” Axis travel 120”
- “Y” Axis travel 160”
- “Z” Axis travel 11”
- “X”, and “Y” rapid displacement up to 1500 inches per minute, “Z” 50” per minute
- Tool max Diameter 6”
- Tool max length 6”
- Tool max weight 30 lbs.
- Spindle nose ISO 40.
- Spindle motor power 17 hp.
- Spindle max rotation speed 10,000 rpm.
- Power supply required 3 phase 460/480Volt AC, 60hz. (100amps)
- Overall dimension of the machine length – 19’ - 6”, width 14’, height from top of spindle on carriage 96 inches
- Water requirement 20 liters/minute.
- Machine weight approx 6 tons.
- Sound pressure level less than 80 decibels.
- Compressed air required 120 psi
|
|
|
|
